First select Compaq as your manufacturer and then select the correct Compaq product type desktop, notebook, etc from the selections that follow. But shopping online is more than about prices. Compaq has provided extra guide screws installed in the front of the computer chassis behind the front bezel. If you have locked the Smart Cover Lock, see the previous section on Smart Cover Lock or use Computer Setup to unlock it. Evo is a trademark of Compaq Information Technologies Group, L. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. All of our Compaq Evo Workstation W4000 memory upgrades are tested here in our test lab and backed by a lifetime warranty.
Serial Number Location Changing from a Minitower to a Desktop Configuration 1. Remove the drive from the drive bay and store in anti-static packaging. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. Connect the power cable 1 and signal cable 2 to the hard drive. This type of damage may reduce the life expectancy of the device.
Be sure that the backup media is not exposed to electrical or magnetic impulses while stored or in transit. Caps Lock light Indicates whether the Caps Lock feature is on or off. Scroll Lock light Indicates whether the Scroll Lock feature is on or off. Turn on the monitor, computer, and any devices you want to test. From the Compaq Evo Workstation memory page you can now select your model, Compaq Evo Workstation W4000 Memory.
The Compaq supplied metric screws are black. Used in combination with other keys to perform other functions. The configuration of the drive employs a cable-select feature that identifies the drive as device 0 primary drive or device 1 secondary drive. Activating the Drivelocks Shown from the Rear of the Chassis 6. Be sure to install the bracket so that sharp edges do not extend from the edges of the computer chassis. Reset the date and time, your passwords, and any special system setups, using Compaq Computer Setup. While pressing the drivelock, pull the drives out of the drive bay.
It is about feeling comfortable and secure and knowing that you are shopping at a store you can trust. Connecting the Signal Cable and Power Cable 2—20 Hardware Reference Guide. Keep this number available for use when contacting Compaq customer service for assistance. Even oftener it is hard to remember what does each function in Personal Computer Compaq W4000 is responsible for and what options to choose for expected result. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock. Open both latches of the memory module socket 1 , and insert the memory module into the socket 2. When the drive is properly inserted, the drivelock will secure it.
The other end of the audio cable 3 should be connected to the embedded audio connector on the system board. Disconnect the power cord from the power outlet and disconnect any external devices. Install the adapter in the desired drive bay 2 by sliding it into the front of the drive cage; the drivelock automatically secures the adapter when it snaps into place. Refer to the Computer Setup Guide. To obtain a FailSafe Key: Contact your authorized Compaq reseller or service provider. Data Memory Systems has set the standard for Customer Service First since 1987.
Install two guide screws on each side of the adapter 1. Press drivelock mechanisms 1 or 2 to unlock the drive in the drive bay. This configuration Compaq provided was complete with a 1. Some options use metric hardware. .
Changing from a Minitower to a Desktop Configuration 12. To release the drives from the 5. Removing an Expansion Slot Cover 1. When replacing a hard drive, the replacement drive should be of the same type as the drive being removed. To release the drives from the 5.
Optical Drive Specifications Table 2-9. A memory upgrade is the easiest and least expensive way to add more life to your Compaq Evo Workstation W4000. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. Gently slide the drive into the bay. Extra guide screws are provided on the front of the chassis, under the front bezel. Fortunately you can find all manuals for Personal Computer on our side using links below. Shut down the operating system properly, then turn off the computer and any external devices.