Best is you just calibrate it! Introduction to using Your Manual. The improper use, handling, application, and disposal of pesticide products applied by this machine may cause death or serious injury. The spray switch can be mounted on either handle. Otherwise the hopper is just like Lesco I run mine on around 15 You will love this machine! Kinda sucks, now I cant play on it. The Permagreen Triumph Ride-On Spreader-Sprayer has the unique combination of granular applicator and a twin-nozzle liquid sprayer and the ability to make liquid applications, giving you the ultimate in versatility and productivity. Then laminate your own chart and stick it to the tank.
Increase your productivity with this Ride On Spreader. The Drain Valve C can be used to flush the spray system, drain the tanks or fill the Spot Sprayer bottle included. The unique claw design sweeps the inside of the hopper openings, breaking up clods and maintaining and even flow in all types of weather. The one thing I want to do is set it up to spray one acre on one tank of liquid. Went out saturday and bought a new magnum. I am sure most of us would like to know how many sqft you cover with one gallon of solution. Just don't overload it on slopes or if you have a lot of turns, it will work you to death.
Such replacement parts will be provided free of charge to the original purchaser for one year from the date of delivery. Low Gear provides a forward speed of 3. Test braking and adjust as necessary. Decrease the pattern width by lowering the nozzle level. It has a 150 lb hopper capacity and a top speed of 5-mph. Suppose you go at 5 miles per hour that would be 440 feet per minute.
These are constants that do not change unless the machine or a component is not func- tioning correctly or is misaligned. Try to work it so you are half full or less when doing slopes or ditches. Keep a firm grip on both handles. Understanding Safety Messages Machine Labels This manual and the labels on the machine contain messages to bring to your attention to potential safety concerns, machine damage, operation, and maintenance information. Stand only on footpads; Replace worn footpads; Keep footpads clean. I lucked out this round and hit the setting dead on in the first try! One for drive and one for low? Read it now before beginning.
If you don't have scales and don't want to scoop all the fertilizer out of the hopper then: Use a big lawn and a stopwatch. This manual explains machine inspection, operation, troubleshooting, and service, as well as, the safety features of the machine. Its beeen raining for 2 days and so far I have got over 2 inches. The machine also has a tendency to rollover when performing this maneuver. Before attempting to start or operate your Triumph, please read the Operator Manual and safety labels on the machine. Brake Systems A Front Brake System. It was really rough ground, though not all that steep, but because of the roughness I was not getting traction with me on it, so I hopped off folding the handle down as I went, or course at the same time the drive wheels went into a rut, next thing I knew the handle was yanked from my hands and the foot platform hit me in the leg as it went skyward.
Trainee must be instructed how to safely load and unload the Triumph from a transporting vehicle. Plan the spray application pattern required to cover the manual application area. I was just happy that nobody actually saw me do this! Great fun scooping up probably 50+ lbs. This works fine for mowing, but it can be disastrous for spraying turf care products through a sprayer that requires a consistent rate of speed for accuracy. Using a trim nozzle provides an even finished distribu- tion over a spray pattern of 6 feet 1.
Read this Manual before using. Then I will be too busy to spend a day trying to figure out how to run and calibrate it. Test braking and adjust as necessary. There are 4 gears available: Reverse, Neutral, Low, and High. Loss-of-control may cause death or serious injury. Good luck I know I've learned to love mine! Cover it with plastic and glue it to the tank.
Repeat Phase I training using High Gear. Forget what the manual says - Calibrate, calibrate, calibrate. Im really itching to get it out. Threw out almost 4,500lbs of fert in 4 days last week, and only one day of that did I work late. I guess when the rain quits I will still be dragging a hose. High gear provides a forward speed of 5. Time it, readjust and repeat.
And how many seconds it takes to put out 50 pounds of fertilizer. Spray Valve J selects Low gear Broadcast and Trim Nozzles. Confirm that the machine travels in a straight line without pulling right or left and no unusual noise is detected. The only way to prevent those quality-robbing variations in application is to require the technician to make distracting, delicate and complicated adjustments to the spray pressure while driving. When a revision is provided, insert the revised pages in the manual. Description of Sprayer features, controls, and operation The spray pattern and spray rate are controlled by the engine speed, pump pressure, and the nozzle orifice. When making turns, slow down and make gradual turns.